Oh an I reckon they must look cool
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| koa soundhole bracing on spruce top? http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=4713 |
Page 1 of 1 |
| Author: | kama [ Tue Jan 24, 2006 10:21 am ] |
| Post subject: | |
hello everyone, i am new here and was direceted here by john from bluescreekguitars. i purchased a great 1937 hauser koa guitar kit from him. i have built a ukulele previously and that is the history of my luthier career so far. building this guitar is now taking up all my free time and more and keeping me very entertained. i am trying not bombard john with too many questions as well as get other opinions for my questions.i am wondering if anyone can give me some advice on a concern i recently realized on my in progress guitar. i am ready to glue the soundboard to the sides but i realized that i used koa braces for the soundhole bracing instead of the crossgrained spruce. does anyone think this will effect the sound quality of the finished guitar, slightly, dramatically? and if so how do i remove the 2 koa soundhole braces and replace them with the cross grained spruce. thanks any input will be very helpful to me. |
|
| Author: | RussellR [ Tue Jan 24, 2006 11:21 am ] |
| Post subject: | |
You are fine with Koa, my opinion is that they would have no effect. |
|
| Author: | RussellR [ Tue Jan 24, 2006 11:21 am ] |
| Post subject: | |
Oh an I reckon they must look cool
|
|
| Author: | kamaK [ Tue Jan 24, 2006 3:38 pm ] |
| Post subject: | |
thanks, ill leave um in place...and they do look pretty cool. |
|
| Author: | Serge Poirier [ Tue Jan 24, 2006 4:00 pm ] |
| Post subject: | |
Welcome to the OLF Kama ! And good luck with your build! Also send pics when you have a chance 
Serge |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|